Skip to Content

Is Your Ninja Blender Smoking? 6 Reasons and Fixes

ninja blender smokingIs your Ninja blender smoking? Ninja blenders are a great kitchen tool, but sometimes they may produce smoke. This article will show you what could cause smoking from your Ninja blender, how to fix it, and what steps to take if the problem persists after following these tips.

Smoke coming out of your Ninja blender is never a good thing. It means that something has gone wrong with the machine, and it needs to be fixed as soon as possible or you’ll risk damaging it more.

Here are 6 Ninja blender fixes that will help you get your Ninja back to normal.

Read More: Best Ninja Blenders: 3 Top Rated Models

Why is my Ninja Blender Smoking?

If your Ninja blender is smoking, it could be due to a few different problems. Here are the most common reasons why your Ninja might smoke when you run it:

Overheating

This is the most common reason for smoke from a Ninja blender. If you use your blender too much, it may overheat and start to emit smoke. You can fix this by letting it cool down before using it again or running it at a lower speed when blending hot items like soup or smoothies.

Oil in the Motor

If you have used something oily in your blender, this could be the cause of your smoking Ninja blender. Tiny amounts of oil can get into the motor, and when it gets hot will create smoke that smells like burning oil.

Ninja Blender is too Full

If you have overfilled your blender with ingredients while blending, small amounts of liquid may get into the inside of the blender and will cause smoke when it gets too hot.

Ninja Blender Needs to be Cleaned

If you haven’t cleaned your blender for a long time, this could be the cause of your smoking Ninja blender. Food and especially oil can build up in the blades and motor over time and create smoke when it gets hot enough to burn off these oils.

Voltage is too Strong

If you purchased your Ninja blender in the US and are using it in a different country, the voltage may be too strong for your blender to handle. This can cause smoking from the motor and will damage it if left on for a long time.

Blades not Spinning Freely

If the blades on your Ninja blender are not rotating freely, this could be another cause of smoking. If they get stuck while running it may create smoke when you try to spin them again.

This can happen if the blades are old or have dried-up food stuck to them.

Read More: Why Is My Ninja Blender Power Light Blinking – 5 Reasons and Fixes

How to Fix a Smoking Ninja Blender?

fix a smoking ninja blenderIt’s important to note that some smoke is normal when you use a Ninja blender, especially in hot liquids like soup or smoothies. If there are no strange smells coming out of your machine, this is most likely what happened, and using it at a lower speed should fix any problems you have further down the line.

However, if you smell something burning after unplugging your Ninja blender, turn off all power sources immediately. There are several easy things you can do if your Ninja is smoking, and they’ll help get it back in working order quickly. Here’s how:

Let the Blender Cool Down

If your blender is smoking it needs to be allowed to cool down before trying anything else. You can open the lid and let all of the smoke out, then wait a few minutes for it to cool off.

Don’t Overfill Your Ninja Blender

If you have too much in your Ninja blender, this can cause smoke when it starts to heat up. Reduce the number of ingredients so there is less for the blades to blend and let it cool down before using again.

Run Your Ninja Blender at a Lower Speed

When running hot items through your Ninja, reduce speed or run them longer if possible. This will help prevent overheating that could lead to smoking from your blender. You might also want to consider adding more liquid while blending hot soup with the Ninja.

Clean Your Ninja Blender

You should regularly clean your blender to keep it in good condition. If you don’t, food and oil can build up over time which will cause smoking when the blades get hot enough to burn this buildup off. Cleaning instructions are usually included with most Ninja blenders.

Read More: How To Clean A Ninja Blender – 9 Simple Steps

Replace the Blade Assembly

If you have tried everything but your Ninja still smokes, it may be time to replace the blade assembly. This is easy for most Ninja blenders and won’t cost much money at all. Sometimes the blades are old or rusty, especially in older blenders. This will stop them from moving freely and cause the motor to overheat.

Read More: Ninja Blender Blade Not Spinning – 4 Simple Solutions

Check the Voltage

If you are using your Ninja blender outside of the US, check to make sure that the voltage is right for it. If not, this could cause smoking from the motor and lead to lasting damage if left on too long.

What Should I Do If My Ninja Blender Keeps Smoking?

This means there is still an underlying problem causing smoke even after following these steps above which are meant specifically for fixing a smoking machine. Here are some things you can try if your Ninja blender is still smoking:

Call the Store Where You Purchased It from

If you purchased it from a store, make sure to contact them and let them know. They will likely replace or repair the machine for you which should solve any problems that were causing smoke in the first place. If they refuse, then call Ninja directly at (800) 279-6887 for support with this problem.

Ninja blenders come with warranties so contact customer service about replacing or repairing your unit under warranty before trying other options.

Replace Part of Your Ninja Blender

Since there may be oil getting into different parts of the blender when running hot items through it could cause oil issues even after following the above steps. In order to fix this issue, consider replacing part of your Ninja blender such as blades or containers so no more oil gets into the motor which could cause smoking again.

Read More: Ninja Blender Smells Like Burning Rubber – Things To Check

Ninja Blender Smoking – Final Thoughts

If your Ninja blender is smoking, it’s important to take the necessary steps as soon as possible. The reasons why a Ninja blender may start producing smoke are varied, but one thing that will help you fix this problem quickly is knowing what causes Ninja blenders to produce smoke in the first place.

That’s where my advice comes into play. I’ve outlined six of the most common issues and how they can be fixed along with some preventative measures for each issue so you can avoid having to deal with these problems altogether.

Of course, there are other things you should know about Ninja blenders before buying one – like whether or not they’re worth their price tag- but if you have any questions at all don’t hesitate to contact me anytime. We all know a Ninja blender is a pricey machine, but it’s worth every penny.

Read More: How To Sharpen Ninja Blender Blades – 5 Simple Steps