Skip to Content

Is Your Ninja Blender Lid Stuck? 7 Reasons & Solutions

ninja blender lid stuckIs your Ninja blender lid stuck? Ninja blenders are great kitchen tools to have in your home if you enjoy cooking. However, Ninja blenders can be tricky if they don’t work properly.

One of the most common Ninja blender problems is that the lid becomes stuck and won’t open or close correctly which makes putting ingredients in and taking them out difficult. This can cause a huge problem for Ninja blender owners.

If your Ninja blender lid is stuck, it can be frustrating. It’s hard to blend food without a Ninja blender lid.

If you find yourself with this problem, there are 5 solutions that may fix your Ninja blender with a stuck lid so it will work again.

Read More: Best Ninja Blenders: 3 Top Rated Models

Why is my Ninja Blender Lid Stuck?

There are many reasons why your Ninja blender lid may be stuck. This problem can be frustrating and make using your blender difficult. Fortunately, there are some solutions to this problem which I will outline below.

First, here are some reasons why a Ninja Blender lid may become stuck:

The Lid or Seal is Clogged

One of the main reasons is because it has become clogged up with food particles, especially if you use sticky ingredients like bananas or peanut butter which can get caught in certain parts of the blender and cause them to not function properly anymore.

Worn Out Parts

Another reason why your Ninja blender could have a stuck lid is that over time lids will wear out and lose their suction ability which causes this problem as well.

Sometimes there are pieces within the blades that break off over time but most commonly one part called an O-ring gets damaged causing the issue with sticking lids on Ninja blenders.

The handle release mechanism contains small tabs that help to close and open the lid. If these tabs are broken or damaged, your lids will not work properly.

Excess Water After Cleaning

If you have had any water left in the blender after cleaning it, this can cause problems as well. If you put your Ninja blender parts in the dishwasher, water can remain in the seal. This will create excess suction which will make it hard to open and close the lid.

Overfilling the Container

If you are trying to blend thicker ingredients like frozen fruit or ice, if you overfill your Ninja blender container with these types of foods, this could create pressure in the lid which will create more suction.

Read More: Ninja Blender Not Working – Troubleshooting Problems & Fixes

How to Fix a Stuck Ninja Blender Lid

ninja blender lid stuckNow that you know why the Ninja blender lid may be stuck, it is time to look at some solutions. Here are some solutions you can try to fix a stuck Ninja Blender:

Wait for Several Hours

One of the first things you should do is just wait a few hours. Sometimes, as you use your blender and ingredients mix together, they can cause more suction in the lids which will make it harder to open them again after having been stuck. If this happens simply let some time pass and try opening your lid later on when it feels looser or easier to move around.

If you have just washed your Ninja blender and cannot remove the lid, waiting a few hours will allow the water to dry. Then you can try opening the lid again when the suction isn’t as strong.

Loosen Lid with Water or Oil

If waiting for several hours does not work, another simple solution is to add some water or oil to your blender container and blend it at high speed briefly. This will help loosen up any clogs in the seal which might be causing problems with your Ninja Blender lid closing properly.

You should then use a spoon to scoop out excess food particles that may have gone into these crevices during blending so they do not get stuck later on when trying to open the lid again after this process has been carried out successfully.

Fill the Pitcher with Water

Fill the blender pitcher with hot tap water and let it sit for a couple of minutes. This should help the seals lose some of their suction, allowing you to twist off the Ninja blender lid easily.

Wear Rubber Gloves

This may seem like a strange solution, but the rubber will give you a better grip and make it easier to twist open your Ninja blender lid.

Working from the top of the container, where you see indications for twisting off lids on Ninja blenders, use a rubber glove or dishcloth over your hand and grip it tightly while turning in one direction only until you feel some resistance when opening this part of your blender.

Use Tweezers or a Flat Head Screwdriver

If you look closely at where the lid attaches to the pitcher, you will notice small plastic tabs. If these don’t work correctly then your lid won’t come off.

You can use a pair of tweezers to pull the tabs back into place or you could also try using a flat head screwdriver if that is what’s available.

When pulling these small plastic pieces back in, make sure they are facing upwards so when you attach your lid again it will have full suction power.

Carefully Pry it Open

If you do not have any water or oil and your lid is stuck, another solution to try is carefully prying it open with a tool like a butter knife.

You should make sure that this process of opening the Ninja blender container has been done very carefully as some lids are made from plastic which can be compromised if they are forced in an incorrect manner causing them to break completely.

When All Else Fails … Don’t Force It!

This might seem obvious but sometimes we get into such a rut when trying to fix something quickly without taking our time so let me say again: Do NOT force anything on your Ninja Blender even though it may feel hard at first.

If you think about what causes the problem of a Ninja Blender lid sticking, it is excess suction that occurs from the ingredients or water inside of your blender.

All you need to do in order to fix this problem is remove some of those liquids or solids so they can flow out more easily and let go of any excess pressure within the container which will allow your Ninja Blender’s seal to open up more freely.

If you try the above tips and the lid still won’t open, just keep trying.

Read More: Why Is My Ninja Blender Power Light Blinking – 5 Reasons and Fixes

How to Prevent Your Ninja Blender Lid Becoming Stuck

Hopefully, you now have a Ninja blender where the lid can come off easily. There are a few preventative steps you can take to ensure your Ninja blender lid does not become stuck again.

Make Sure Lid Is Clean and Dry Before Replacing It

Before putting your Ninja blender lid back on the container after cleaning, take some time making sure it is completely dry first without residue from water left behind. If there are any food particles stuck inside this part of the blender then scraping them away with something like an old toothbrush should work well for removing all debris before reattaching the lid to the pitcher.

Store the Lid Separately from the Pitcher

One of the best ways to keep your Ninja blender lid from becoming stuck in the future is by storing it separately from your pitcher.

When you are not using the blender, place all parts inside a cabinet or drawer, and when it’s time to create some delicious smoothies again, just pull out these pieces one at a time before starting this process up.

Clean your Ninja Blender After Every Use

It may seem like a chore to clean your Ninja blender after each use but it will actually help prolong the life of your appliance and keep this part from getting stuck again.

Food particles and residue left behind will eventually start to harden and cause issues in the future if you do not clean it out after each use.

Read More: How To Use A Ninja Blender – Ultimate Assembly & Tips Guide

Ninja Blender Lid Stuck – Final Thoughts

The Ninja blender lid becoming stuck is a common problem for many people who use this kitchen appliance. But, don’t worry! With the right tools and knowledge of how to fix it, you’ll be able to get your blender working again in no time.

By following the above tips you should be able to prevent your Ninja blender lid from becoming stuck again. If it does, you will know exactly what to do and how to fix the problem once and for all!

Read More: Can Ninja Blenders Go in the Dishwasher? Find Out Now