If you own a Ninja blender, then you are probably familiar with the power light on the front of it. Is your Ninja blender power light blinking? Then there’s a good chance that something isn’t right. If your ninja blender power light is blinking and you’re not sure why, or what to do about it, then this article will help!
There are many reasons why your Ninja blender might be flashing its power light and if left unaddressed, these issues could lead to bigger problems in the future.
This article will go over the most common reasons why your Ninja blender power light is blinking, and show you how to fix the problem.
Read More: Best Ninja Blenders: 3 Top Rated Models
Why is my Ninja Blender Power Light Blinking?
There are a number of reasons why the power light on the Ninja blender might be blinking. If your power light is flashing, you need to diagnose the problem as soon as possible to prevent further damage. Here are the most common reasons for the Ninja blender power light blinking.
Arrows not Correctly Aligned
The first thing to check when your Ninja blender power light is blinking is that you properly aligned the arrow with the arrows on both halves of the pitcher. If these arrows are not lined up correctly then it could cause a number of issues and be causing your Ninja blender power light to blink as well.
If the power light is flashing red, then your Ninja blender will not start. This means that you need to check the arrows on both halves of the pitcher and ensure they are lined up correctly before trying to use it again.
Lid Not Seated Properly
The second most common reason for the Ninja blender power light blinking is because the lid has become unseated or loose while running, which will cause the power to shut off for safety reasons.
If you notice that the power light is flashing red, the first thing you need to do when this occurs is to reseat the lid tightly on top of both halves of the pitcher!
Make sure that when you place your blending container back onto its base, that you hear a loud click sound letting you know that it’s seated tightly in place. If there isn’t a click sound, you may have to reseat the lid a few times before it’s properly seated.
Blender Not Seated Properly into Base
Another common reason why your Ninja blender might be flashing its power light and you’re wondering what to do about it is that perhaps one part of the container isn’t snapped in all the way.
Your Ninja pitcher should snap easily and firmly into the base. The front of the pitcher should be facing you and it should click or snap into place. If you notice that the power light is flashing red, make sure to double-check and ensure your blender pitcher has been properly snapped in all the way.
Check both sides where they meet together to make sure everything has been seated completely before using again. Make sure no part looks like it’s leaning or crooked either as this can lead to other problems as well such as damage to the blades.
Ninja Blender is Overheating
If your Ninja blender is overheating, then the power light will start flashing red to signal that it needs to cool down.
You may also see smoke coming from around the base of the pitcher when this happens as well so there’s no mistaking what’s happening when your Ninja blender is overheating.
This can be dangerous if you continue using it while it’s overheated because you could burn yourself or damage other parts of the unit. Make sure to let it rest for at least 30 minutes before trying again once you’ve noticed that it’s overheating during use.
Read More: Ninja Blender Blade Not Spinning: 4 Simple Solutions
Blender Needs Cleaning
The last common reason why your Ninja blender might flash its power light, and one which should not be overlooked, is that perhaps something is lodged inside the blender.
The easiest way to check this is to remove both parts of the pitcher and take a look at where they meet together as well as underneath them. If you see anything stuck, such as food scraps or other objects, then carefully pick those out so that your Ninja blender will operate correctly again!
It’s important not to run your appliance until it has been cleaned because otherwise there could be further damage done which might require professional service in order to fix.
Read More: How To Clean A Ninja Blender: 9 Simple Steps
Ninja Blender Power Light Still Blinking?
There are some instances when no matter what, even after following all these tips to stop the power light flashing you still can’t get it to work. The best thing to do in this situation is to unplug your Ninja blender from its power source and then plug it back in again after 10 minutes.
If the power light is still blinking, chances are there’s a problem with your appliance that you’re going to need help fixing. Contact the store where you bought it or call customer service for assistance as soon as possible if this occurs.
This could be due to other issues such as a faulty cord, which will require the use of a professional in order for this issue and others like it to be resolved. Another cause might be a damaged motor inside the blender, which is a possibility if you’ve dropped it or used it roughly in any other way.
If your Ninja blender has been dropped, make sure to check for cracks on the plastic parts too as these could be dangerous and cause injury when using again!
If none of these reasons seem to apply though, then your Ninja blenders power light not working may simply mean there’s an electrical short somewhere inside the unit itself even if you haven’t done anything wrong.
This means that it’s best just to contact customer service and let them know what has happened with your ninja blender because they will help to find out why before taking any further steps to resolve the issue.
Read More: Ninja Blender Not Working: Troubleshooting Problems & Fixes
Ninja Blender Power Light Blinking – Final Thoughts
A Ninja blender is a powerful kitchen appliance, but like any electrical device, it can break. If your power light on the front of your Ninja Blender starts blinking and you’re not sure why or what to do about it, this article will hopefully help you sort the problem.
There are many reasons why the power light might be flashing, so read through our list of solutions before taking other steps. If you can’t seem to fix the problem yourself, then contact Ninja for assistance or visit your local appliance repair shop.
As long as you’re careful when using it and follow all of these tips on how to stop a Ninja blender from flashing its power light, chances are good that you’ll find the solution here.
It’s also important that you take care of these issues quickly because if left unaddressed they could lead to bigger problems in the future. Make sure to follow all instructions carefully and remember: always clean your machine after using it!
Read More: Why is my Ninja Blender Leaking? 5 Causes and Fixes