Skip to Content

Why is my Ninja Blender Leaking? 5 Causes and Fixes

ninja blender leakingNinja blenders are great for making smoothies, soups, and other foods. However, sometimes your Ninja blender leaks. which can be frustrating when you’re in the middle of making your favorite drink or meal.

A Ninja blender leaking is not something that should worry you because Ninja has built its brand on quality and innovation. Usually, there is a simple fix to stop your blender from leaking.

Leaking most often occurs when you overfill your Ninja blender or if there’s too much liquid inside of it at any given time. Ninja blenders also leak when they’re improperly placed on their base, causing water to flow up and out of the bottom cap.

This blog post will explain why Ninja blenders leak and how you can fix it!

Read More: Best Ninja Blenders: 3 Top Rated Models

Overfilling the Ninja Blender Cup

The main reason your Ninja blender is leaking is usually that the blender cup is too full.

When the blender cup is overfilled, water starts to push through the bottom of your Ninja lid. This happens because there isn’t enough room for all of the liquid in the blender’s chamber.

If you’re having trouble not filling up your blender with too much food or drink at once, it can help to cut down on volume by pre-chopping any foods that are large before putting them into your Ninja Blender Cup so they fit better inside of it.

Also, be sure to wait until after you’ve poured some liquid into the top portion first and then go back around and add more ingredients as needed—this way everything will blend together properly without issues.

Not Placing Your Blender Right On The Base

Another issue that causes Ninja blenders to leak is if the blender isn’t placed properly on its base. If you don’t align the blades of your blender with the bottom portion correctly, it can cause water to flow out through the small opening at the top underneath where your blade assembly sits.

If this happens, make sure you’ve aligned everything correctly and that there’s no food or drink blocking any part of the coupling area between the cup and base sections before turning on your blender—this way you won’t have leaking issues.

Read More: Is Your Ninja Blender Smoking? 6 Reasons and Fixes

Leaking Can Occur When Not Blending Properly

Some Ninja models might also start to leak for reasons other than an issue with how full or poorly placed they are inside of their bases.

This often occurs because something has gotten stuck in the blades of your blender. If there’s anything caught inside (like a piece of ice, for example), it could cause problems with how smoothly your Ninja Blender can blend together ingredients inside of it – which will then result in water leaking out through the bottom opening instead.

If you’ve gone to make something like soup or a smoothie using your Ninja blender but notice that liquid is coming out underneath where the blade assembly sits on top, check to see if there are any chunks caught up between the blades themselves before turning off your machine.

Once you turn off the power source, just carefully remove what might be causing issues by hand so that everything blends properly again without leaks!

Read More: Ninja Blender Blade Not Spinning – 4 Simple Solutions

Rubber Gasket Needs to be Cleaned or Replaced

ninja blender rubber gasketIf you’re noticing that your Ninja blender is leaking quite a bit and you’ve already made sure the cup section isn’t overfilled or placed incorrectly on its base, then there’s another issue that might be causing leakage.

The rubber gasket under where the blade sits inside of most Ninja Blenders can get worn out with regular use—especially if it becomes dirty after washing! If this happens, it will cause food particles to build up in between so when you go to blend things together they’ll also push through into the main chamber area and start making water leak from underneath.

This is because once any type of liquid gets mixed in with these pieces they won’t flow back down again like should unless cleaned off first.

To fix this problem, you’ll need to make sure the gasket has been cleaned off or replaced entirely. This can be done by purchasing a new rubber ring for your Ninja blender if yours is old and worn out – or it might even be easier to just get rid of that model altogether (depending on how much money you want to spend) in favor of getting one with more features like multiple speed levels, different cup sizes, etc.

Read More: Can Ninja Blenders Go in the Dishwasher – Best Cleaning Practices

How to Stop Your Ninja Blender Leaking

Now that you know the reasons why your Ninja blender is leaking, it’s time to stop the problem from happening.

Don’t Overfill the Blender Cup

To get started, you’ll need to make sure that your Ninja Blender Cup is filled up only halfway with whatever liquid or food items you’re going for – and then go back around and add more as needed until everything blends properly without a mess.

Ensure the Blender is Properly Seated on the Base

You should also be careful about placing your blender on its base so it lines up correctly before turning it on. If there’s anything caught in between these two areas of your blender while they’re being coupled together, water will start leaking out through the bottom area underneath them – so always double-check this part carefully if any issues occur after making something with liquids inside of your cup.

Read More: How To Use A Ninja Blender: Ultimate Assembly & Tips Guide

Clean the Gasket

To make sure the rubber gasket on your Ninja blender is clean, give the blender jug a really good clean using dish soap and warm water. Rinse off the soap and then make sure it’s completely dry before putting everything back together again.

You can repeat this step several times if you can still see any food particles or other marks on the rubber gasket.

Replace Gaskets When Needed

If your blender is still leaking even after you’ve thoroughly cleaned it, then it might be time to buy a new gasket for your Ninja Blender Cup instead.

There are plenty of places online that offer these parts at affordable prices. If this part gets worn out completely over time, there won’t be anything holding back any liquid from spilling into the main blender container – and if this happens while using hot liquids they could cause some serious injuries.

So always remember to take care of your Ninja Blender and replace old parts when needed.

Read More: Ninja Blender Not Working – Troubleshooting Problems & Fixes

Why is my Ninja Blender Leaking Black Liquid?

This is a problem usually found in Ninja blenders that are a few years old. The black liquid is a combination of whatever you are blending getting into the inside of the blender. When enough residue builds up it can cause the excess to leak out. This is not a serious problem but it will make your blender look bad and need more cleaning than usual.

There are two things that you can do if your Ninja blender starts leaking black liquid into the cup or onto the base of the unit itself. First, clean off any built-up residue before using it again so no food gets caught between areas when coupling them together for use next time around.

Second, remove the blade and the gasket and give it a proper clean. Use dish soap, hot water, and an old toothbrush to get into the crevices. This will help with removing any grime that has built up over time.

When everything is clean and put back together, rinse the blender by adding hot soapy water and running it on full for 60 seconds. Rinse the blender this way after every use to prevent the problem from re-occurring.

Read More: Is Your NutriBullet Leaking? 7 Causes & Easy Fixes

Ninja Blender Leaking – Final Thoughts

I hope this blog post helped answer some questions about why your Ninja blender leaks as well as the reasons behind the leakage problem. As you can see, there are a number of reasons for a leaking Ninja blender, and there are also fixes for each problem.

Before concluding this blog post, I’d also like to leave you with a few final thoughts on the subject of why your Ninja blender is leaking.

I’ve personally experienced these issues with my own Ninja blenders throughout the years that have been causing them to leak, and they’re all things that can be avoided if you know about them ahead of time.

Follow these steps as well as buying a replacement gasket should yours become damaged, and your Ninja blender will continue working like new for many years to come.

If you have tried the tips above but your blender is still leaking, then it might be time to buy yourself a new one.

Read More: How To Sharpen Ninja Blender Blades – 5 Simple Steps