I cook a lot in my house and love to experiment with different cooking techniques. One of the handiest appliances that I use is an immersion blender for sauces, soups, smoothies, and more. It’s easy and quick to use and will save you tons of time on food prep tasks.
These are great tools to have in any kitchen and they are really easy to clean. You may be asking: is an immersion blender dishwasher safe? Read on for more information about cleaning these handy appliances.
If you’re looking for a way to make life easier in the kitchen, then an immersion blender might be just what you need.
While some models are dishwasher-friendly, others aren’t so much. The best thing to do is consult your user manual for guidance. Also, don’t put the motor in the dishwasher for obvious reasons. Can you put an immersion blender in the dishwasher? Find out with these handy tips.
Read More: What Are Immersion Blenders Used for: 15+ Simple Tips
Can You Put an Immersion Blender in the Dishwasher?
If you have an immersion blender with a removable shaft, the chances are it will be fine in the dishwasher. I recommend consulting your user manual before putting it in the dishwasher. Otherwise, you risk damaging the device and voiding your warranty.
If you don’t have a removable shaft, your immersion blender isn’t going to be able to handle a run through the dishwasher. You should never put any electrical items in the dishwasher, and an immersion blender has an electric motor.
Also, the metal blades of a hand blender may start to corrode if frequently run through a dishwasher. This is why even if your immersion blender can go in the dishwasher, it’s probably a good idea to wash it using an alternative cleaning method.
Don’t worry though, washing an immersion blender by hand isn’t difficult at all.
Are Immersion Blenders Easy to Clean?
Immersion blenders are easy to clean because of their compact design. No part is hard to reach, unlike a traditional blender or food processor. You can fit an immersion blender in a sink or a tub and carry out the cleaning process without any hassle.
There is a bit of a cleanup process with an immersion blender, but it can be done in a very short space of time. The first step once you’ve finished using the device is to remove any food from the blades. Since immersion blenders have such easy-to-reach blades, this part of the process should be quick and straightforward.
The worst thing that will happen as a result of food getting into your blade area is that your motor may get clogged. Food particles can also put pressure on other parts of the machine, so they’re best removed before putting your immersion blender in storage or transporting it.
How Else Can You Clean an Immersion Blender?
The best way to clean your immersion blender is to use hot, soapy water. If you’re short on time and want to give it a quick rinse then that’s okay as well. Just remember that the base can’t be immersed in water as this will damage the unit and any electrical components such as the motor.
As mentioned above, you should also try not to put your blades in the dishwasher as they will corrode. I’m sure you won’t have a problem with this though as you’ll probably prefer to do it by hand. Also, never use abrasive supplies such as steel wool or scouring pads to clean the unit.
Read More: 7 Immersion Blender Substitutes: Best Hand Blender Alternatives
Can You Soak an Immersion Blender?
If your immersion blender has stubborn food attached to it, you can soak the shaft in warm water. You shouldn’t soak your immersion blender for longer than a few minutes, as this can corrode the blades.
While it’s fine to leave an immersion blender immersed for a few minutes, you shouldn’t let it sit in water or run under a flow of warm water as this could damage the appliance permanently.
How Do You Dry Off An Immersion Blender?
Once you’ve finished cleaning off your immersion blender, there’s one more task before you can put it away: drying. This is crucial as leaving an immersion blender wet can allow mold and bacterial growth to take hold. Here are a few tips on how to properly dry an immersion blender.
Shake off any excess liquid before drying with a lint-free cloth or paper towel which is free of absorbent particles that could scratch your appliance. You should also keep it away from appliances that give off heat such as ovens, dishwashers, and microwaves to prevent deformation.
Some people like to put their immersion blenders in the freezer for extra protection against bacteria growth, but this isn’t necessary especially if you’ve dried your device properly after use.
Is a Cuisinart Hand Blender Dishwasher Safe?
According to the user manual, no part of the Cuisinart immersion blender is dishwasher safe. This includes the removable shaft.
The best way to clean a Cuisinart immersion blender is to remove any food deposits immediately after use. You can also use a few drops of dish soap in warm water to wash off any remaining bit of food.
Use warm soapy water and a dish brush to clean under and around the blades. The blades of a Cuisinart hand blender are sharp so always protect your fingers when cleaning. Dry the blender using the instructions above.
You don’t have to worry about your immersion blender dulling if you choose this method, but the blades will get progressively worse if they are soaked in water or put into the dishwasher regularly. Again, it’s best to clean them by hand instead.
Read More: Froth Milk with an Immersion Blender: 3 Simple Steps
Is a Vitamix Immersion Blender Dishwasher Safe?
The Vitamix immersion blender is not safe to put into the dishwasher, according to the manufacturer’s user manual.
The bottom section should be cleaned with hot water and soap, while the top section can be wiped off with a damp cloth. As for drying, leave both parts to air dry naturally.
Vitamix recommends not using any harsh abrasive cleaners since they can scratch or dull your blender’s surface which could adversely affect its performance or put your safety at risk.
Is a KitchenAid Immersion Blender Dishwasher Safe?
The KitchenAid immersion blender is one of the few hand blenders that can go in the dishwasher. The base of the blender, which houses the motor, should never go in the dishwasher.
The blender shaft and all of the accessories can go in the top rack of the dishwasher to be cleaned.
When cleaning your immersion blender shaft, pay special attention to the blades. You should remove any food residues by hand and avoid putting your fingers anywhere near the blades.
Is a Bamix Immersion Blender Dishwasher Safe?
No, you shouldn’t wash the entire Bamix immersion blender in the dishwasher because it could corrode and damage your appliance.
The manufacturer recommends cleaning the blender by hand, with hot soapy water if necessary, and air drying it before putting it away for storage.
Read More: Will an Immersion Blender Scratch Pots?
Is a Philips Hand Blender Dishwasher Safe?
According to Philips, their hand blenders are safe for use in the dishwasher. The only part of your blender that is not dishwasher safe is the motor base, which should be wiped off with a damp cloth or sponge after every use.
The rest of your hand blender can be placed in the top rack of the dishwasher, but you must remove any food particles first before placing them inside the appliance.
Is an Immersion Blender Dishwasher Safe – Final Thoughts
If you have an immersion blender, then it is very important to know if they are dishwasher safe. It’s easy to clean them by hand, but some models can’t be put in the dishwasher due to their motors or electrical components.
This blog post showed how to determine which of your appliances are safely compatible with a dishwashing cycle, and I also offered tips for cleaning if a dishwasher isn’t an option.
Follow these guidelines before placing anything into your machine so that you don’t end up damaging any parts of your appliance – even though many manufacturers say this won’t happen.
You’ll want to consult instructions from the manufacturer first since not all brands recommend washing their products in a dishwasher.